Skip to main content

Recycled Bottle Cap Magnet Tutorial


One of the great things about where I work is that I am surrounded by a group of very creative people who are very open with sharing their ideas. So to give credit where credit is due, the inspiration for this tutorial came from Susan from Sew Country Designs.

Supplies:
Recycled metal bottle cap
Recycled color magazine
Scissors
White Glue
1 Quarter
1” wide clear tape
Recycled magnet (free business card magnets or giveaways will work, if not you can buy magnets at craft stores)
Aleene’s Paper Glaze
E-6000 Adhesive
Ruler

  1. Use the quarter to trace a circle around an image from the magazine. Take the tape and carefully place a piece over the circle.



  2. Take a small piece from the cover (which is usually a heavier weight paper) and mount it to the back of the traced image with a light coating of glue. Trim out the image circle.

  3. Glue the back of the circle and place it in the bottle cap. Place the quarter over the image to stop curling until it is completely dry.

  4. Starting along the edge and moving in a circle, apply an ample amount of Aleene’s Paper Glaze. Continue around the circle, working your way around and inward until the image is coated.


    Be careful not to shake or move the glaze too much because it will form bubbles. If bubbles form you can take a pin and carefully pop them. Your image will appear cloudy at first, however as the glaze dries it will become clear.

  5. Cut a piece of magnet that will fit on the back of the bottle cap.

  6. When your glaze is completely dry (I usually let it sit overnight to be sure), take the E-6000 adhesive and glue the magnet to the back of the bottle cap. Let it dry several hours before you use your magnets.

Comments

  1. This is so cool, thank you! I am always saving the caps..mostly from Heinekens..LOL!

    ReplyDelete

Post a Comment

Popular posts from this blog

Leather Earring Tutorial

Why should leather only be used for jackets, shoes and purses? Medium weight or upholstery leather is easy to craft since it doesn't fray or crinkle. These leather earrings are quick, versatile and easy to make. You can even recycle those old purses or jackets that have damage since you really only need small amounts of good leather. I used 4" square leather samples and had plenty left over to make more earrings. Supplies: Leather Leather punch (I bought mine at Michaels Craft store for around $10 but you can also get the from home stores like Home Depot or Lowes) Sharp scissors 2-Large Jump Rings 2-Earring wires Jewelry pliers Download the pattern below, print and cut out shapes. Cut 2-of each shape in the leather of your choice. I used 3 different types of leather, don't be afraid to mix it up. Pile one set of the three shapes on top of each other and carefully punch a whole on one of the ends. I punched the hole about a quarter of an inch away from the end using the sma

Leather Earring Pattern Update

In October I posted a tutorial to make leather earrings . Well for Christmas I revisited this craft and made a few other designs for a few people at my work. This is one of my favorite tutorials because they are so easy to make and the earrings are light and easy to wear. I liked the new designs so much I thought I would share the pattern for them. To view the full set of instructions on how to make these leather earrings, click here . To make one of the two pairs shown, download and print the updated pattern below (the bottom row are the new designs):

Washer Necklace Tutorial

Every time I buy furniture that requires assembly I always left over hardware. I take this hardware and put it in a jar thinking that one day I will need that extra nut or bolt. Well today is that day! Below is a tutorial on how to take those extra washers and make them into a cute necklace. Supplies: Scissors X-acto knife or hole punch Pencil Small piece of scrapbooking paper (you can use the left over scraps for this project) Modge Podge (or something similar) Washer Aleene’s Paper Glaze 36” of ribbon or cord Use the washer to trace a circle on the paper, don’t forget to trace the inside circle as well. Using your scissors cut just inside of the traced line on the outer circle. Note: you want to cut inside of the line and not on it so it fits on the washer and does not overlap the edges. If the hole for your center is close to the same size of a hole punch, simply punch out the center circle. If not use the X-acto knife to cut out the center area. Modge Podge the paper to the washer